We simplify your manufacturing process to make the potential of any material shine.

CNC edgebanding machines for wood ROVER B EDGE: Photo 1
HOME > Products > CNC - Edgebanding
ROVER B EDGE

CNC edgebanding machining centre

Working centres for shaped edgebanding
Edgebanding machining centres from the Rover B Edge range allow users to carry out machining operations to shape and edgeband panels on a single machine.The wide range of sizes, availability of working units and technologies, means that the Rover B Edge is ideal for medium to large as well as prototype production environments.
CNC edgebanding machines for wood ROVER B EDGE: Photo 2
Robust edgebanding
Edgebanding has always been based on applying glue directly to the panel; Biesse has followed this principle and applied it to straight edgebanding as well as shaped edgebanding performed by machining centres. Maximum bonding, possibility of applying thin edges and 3D transparent edges, easy maintenance and panel cleaning during the machining cycle. A perfect combination of Biesse technology and Italian genius.
Optimal edge grip
Similar to straight line edgebanding machines, the glue is applied directly onto the panel in order to ensure optimal adhesion quality. It supports the use of thin or transparent (3D) edges, as well as thicker and sturdier edges.
CNC edgebanding machines for wood ROVER B EDGE: Photo 3
ROS
Integrated robot solutions.

Biesse offers its customers pragmatic solutions for factory automation.

ROS robotised solutions ensure a marked increase in production and total reliability of both the production process and the unloading operations, even in a wider context of industrial automation.

CNC edgebanding machines for wood ROVER B EDGE: Photo 4
Hyperpod

It is the innovative positioning system that allows you to exploit the worktop in height.

The Hyperpods allow, by lifting the pieces that make up a program, to perform processes that were previously only possible on machines with greater width.

CNC edgebanding machines for wood ROVER B EDGE: Photo 5
Maximum flexibility and working efficiency
TM15 Hybrid Top Melt pre-melter

New hybrid system for melting on-demand glue from above:

- Hybrid pre-melter for working PUR, EVA or APAO glue, to meet every possible need

- High flexibility thanks to the possibility to use glue either in granules or in small cartridges

- Quick and easy maintenance procedures

CNC edgebanding machines for wood ROVER B EDGE: Photo 6
DIFFERENT WORK TABLES AVAILABLE ACCORDING TO DIFFERENT NEEDS
CNC edgebanding machines for wood ROVER B EDGE: Photo 7
ATS
Advanced Table-Setting System
For the quick and easy manual positioning of the clamping systems.
CNC edgebanding machines for wood ROVER B EDGE: Photo 8
SA

Set Up Assistance

For the quick, easy and controlled manual positioning of the clamping systems. The linear sensors in the work table, along with the collision control function, reduce the risk of collisions

CNC edgebanding machines for wood ROVER B EDGE: Photo 9
EPS

Electronic Positioning System

For the quick, automatic positioning of the clamping systems in the programmed positions.

The motors, along with the collision control function, ensure controlled positioning movements to reduce the risk of collisions.

CNC edgebanding machines for wood ROVER B EDGE: Photo 10
FPS

Feedback positioning system

Evolution of the EPS system, with the addition of linear sensors that indicate the position of the carriages in real time, reducing the time needed to position them.

Synchro

Loading and unloading solutions. Automated cell for machining a batch of panels or doors.

Synchro is a loading/unloading device that transforms the Rover machining centre into an automatic cell for producing a stack of panels autonomously without the need for an operator:

  • it eliminates the risk of damage in the case of heavy panels that need to be handled by 2 operators
  • it’s easy to use, because the machining centre program also contains the Synchro command instructions
  • it has limited overall dimensions, and can be positioned to the left or right of the machining centre
  • it comes with various configurations, depending on the size of the panels to be handled and the layout of the stacks.
VIDEO

Biesse ROVER B Edge - Multiple parts edgebanding

Biesse state of the art contour edgebanding cnc Rover B Edge. The powerful bEdge software, extension of bSolid, allow a 1 click edgebanding programming and the capability to setup multiple pieces in one program in order to optimize positioning time and tool changing cycles.

Biesse ROVER B Edge - Multiple parts edgebanding

See The Rover B Edge in action processing multiple components in one machining operation. The Setup Assistant helps the operator in repositioning the panels and makes multiple parts machining possible and easy to achieve.

Biesse ROVER B EDGE

CNC Contour Edgebander

Biesse ROVER B EDGE - Double Circle Pendulum Process

Double Circle Pendulum Process Full Demo

Biesse ROVER B EDGE - Drop Shape and Desktop Pendulum

"Drop"Shape and Desktop Pendulum Process Full Demo

Biesse ROVER B EDGE - Manual Edge Feeding

Manual Edge Feeding Tutorial

Stechert Group
Case Histories
Stechert Group
Biesse technology accompanies the growth of Stechert
Go to top of page