Мы упрощаем процесс изготовления изделий, чтобы раскрыть потенциал любого материала.

Обрабатывающие центры ROVER C: Фото 1
POWER MEETS PRECISION
Rover C - обрабатывающий центр для производства мебели, лестниц и рам любых форм и размеров. Он разработан для тяжёлых обработок, которые требуют применения инструментов и агрегатов больших размеров.
TO PRODUCE WITHOUT LIMITS
Технология нового станка Rover C позволяет производить детали сложных форм, обеспечивая качество, точность и долговечность.
EXTREME POWER
The HSD 5 interpolating axis operating unit with a power of 21.5 kW at 8,000 rpm and 360° continuous rotation on the vertical and horizontal axes, it allows the machining of pieces with complex shapes, guaranteeing quality, precision, and total reliability over time.
Высокое качество исполнения обработки.
Absolute absence of vibrations thanks to the Gantry structure with double motorization, extremely solid and balanced, designed to raise the standards of precision and reliability in the execution of the work.
Обрабатывающие центры ROVER C: Фото 2
PIECE PASSAGE IN Z UP TO 500 MM
Possibility to work even large thicknesses
The extreme stiffness of the structure allows for the processing on pieces with X / Y / Z dimensions up to 1950x8125x500 mm, and up to 2250x8125x500 mm as an option, with maximum precision and finish quality.
Обрабатывающие центры ROVER C: Фото 3
ROS
Kомплексные роботизированные решения

Biesse предлагает собственным заказчикам конкретные решения для автоматизации производства.

Роботизированные решения ROS гарантируют значительное повышение производитель- ности, а также полную надежность производственного процесса, как разгрузочных опе- раций, так и в более обширном контексте промышленной автоматизации.

Обрабатывающие центры ROVER C: Фото 4
CFT: Two machines in one, guaranteed competitiveness
Rover C with bar table, convertible into a machine with continuous table, allows you to tackle also nesting, folding and thin panels.
Обрабатывающие центры ROVER C: Фото 5
В ЗАВИСИМОСТИ ОТ РАЗЛИЧНЫХ ТРЕБОВАНИЙ, ПРЕДУСМОТРЕНЫ СООТВЕТСТВУЮЩИЕ РАБОЧИЕ ПОВЕРХНОСТИ
Обрабатывающие центры ROVER C: Фото 6
ATS
Advanced Table-Setting System
Эта система обеспечивает простое и быстрое ручное позиционирование систем блокировки
Обрабатывающие центры ROVER C: Фото 7
SA

Set Up Assistance

For the quick, easy and controlled manual positioning of the clamping systems. The linear sensors in the work table, along with the collision control function, reduce the risk of collisions.

Обрабатывающие центры ROVER C: Фото 8
EPS

Electronic Positioning System

For the quick, automatic positioning of the clamping systems in the programmed positions.

The motors, along with the collision control function, ensure controlled positioning movements to reduce the risk of collisions.

Обрабатывающие центры ROVER C: Фото 9
FPS

Feedback positioning system

Evolution of the EPS system, with the addition of linear sensors that indicate the position of the carriages in real time, reducing the time needed to position them.

Обрабатывающие центры ROVER C: Фото 10
XPS

EXTREME POSITIONING SYSTEM

It is the best performing solution on the market in terms of speed and positioning accuracy. Equipped with a motor for each work surface and for each trolley, it allows the simultaneous positioning of all locking systems. 

Synchro

Pешения по загрузке и выгрузке. Автоматизированная ячейка для обработки партий панелей или дверей.

Synchro - это устройство для загрузки и выгрузки, которое превращает обрабатывающий центр Rover в полностью автоматическую систему, способную самостоятельно штабелировать панели без необходимости какого-либо участия со стороны оператора:

  • исключает риск повреждений при работе с тяжелыми панелями, для выполнения которой в противном случае требовалась бы помощь двух операторов
  • это простое в использовании устройство, потому что рабочая программа обрабатывающего центра содержит также инструкции для управления Synchro
  • имеет небольшие габаритные размеры и может быть установлено с правой или левой стороны от обрабатывающего центра
  • предлагается в различных конфигурациях, в зависимости от размеров обрабатываемых панелей и места их штабелирования.
VIDEO

Biesse Rover C - Twisted Handrail

See Rover C 5 axis Pod and Rail processing a twisted stair component, an extremely challenging product made simple to program thanks to the Biesse Technology. Rover C is the new processing centre for manufacturing furniture, staircase and door and window components of any shape, size and thickness with ease. It was designed to be used for heavy-duty processing that requires large-size tools and aggregates.

Biesse Rover C - Solidwood Arch

See the Rover C 5 Axis, machining a solidwood arch.

Biesse Rover C - Wooden Vase with Lid

See the Rover C 5 Axis machining a wooden vase with lid. The infinite C axis allow to work 360 around the part without the need of time consuming rewiring movements.

Biesse ROVER C - Plexiglass Machining

Custom Demo of Plexiglass Machining

Alpilegno
Отзывы
Alpilegno
Sanding and profiling with a single solution.
Go to top of page