Rover A Edge is an edgebanding machining centre that supports the machining of shaped panels, which can be edgebanded on a single, compact, high performance machine.
It is ideally suited to small and large joineries that need to manufacture either odd size products or standard size products in small batches.
Similar to line edgebanding machines, the glue is applied directly onto the panel in order to ensure optimal adhesion quality.
Glue feed occurs during the machining process via the granule feeding system within in integrated glue head. With the glue being stored in granules, only the required quantity is released for melting.
Presser roller quick changeover kit with reduced diameter version. This ensures the correct pressure is delivered when switching from thick to thin edges as well as small radius curves.
Additional glue pots fitted with quick-release electrical system for PU granule adhesives.
Edgebanding strip finishing aggregate with three functions. Particularly suitable for machining panels with a delicate or glossy surface, or with a protective film.
Blower and anti-adhesive liquid dispensing aggregate.
Brusher aggregate with glue removal liquid dispenser.
Edgebanding has always been based on applying glue directly to the panel; Biesse has followed this principle and applied it to straight edgebanding as well as shaped edgebanding performed by machining centres.Maximum bonding, possibility of applying thin edges and 3D transparent edges, easy maintenance and panel cleaning during the machining cycle. A perfect combination of Biesse technology and Italian genius.
Thin or thick edges, either pre-cut or coiled, with automatic or manual feeding.
The automatic edging feeder, mounted on the X carriage, allows the user to change between thin or thicker edges during the same machining cycle.
Safety and flexibility thanks to the new bumpers combined with photocells with no footprint and dynamic tandem loading.
Pressure-sensitive floor mats enable the machine to operate at constant maximum speed.
22 overlaid layers of side curtain guards to protect the working unit, which are movable to enable the machine to work at maximum speed in total safety.
LED bar with 5 colours showing machine status in real time.
Motorised conveyor belt for the removal of chips and waste.
NC controlled chip deflector.
Suction hood with 6 settings equipped with a blowing unit for panel cleaning.